How High can Rolling Tire Storage Rack be Stacked?

The stacking height of the rolling tire storage rack needs to be considered in combination with the tire type, storage cycle and safety regulations. The following is a specific analysis:

1. Short-term storage (within four weeks)

Stacking height: Tires can be stacked on pallets, and the height generally does not exceed 1.2 meters. After four weeks, they must be stacked again in reverse order to prevent tire deformation.

Special case: If the tire is installed on the rim, it must be inflated and stored vertically according to the direction of the tire rolling. At this time, the stacking height may be limited and needs to be determined according to the specific situation.

2. Long-term storage

Storage method: Tires must be stored vertically on the shelf, and the bottom of the shelf must be at least 10 cm from the ground to prevent the tires from getting damp and deforming.

Stacking restrictions: For long-term storage, it is not recommended to stack tires on the storage rack, but should be stored vertically on the shelf. If stacking is necessary, the height should be much lower than the short-term storage standard, and the tire status needs to be checked regularly.

3. Stacking without shelves or cages

Stacking height: In the absence of shelves or cages, the height of stacked tires should generally not exceed 10 to prevent tire collapse or deformation.

Safety distance: When stacking, you should also pay attention to the safety distance requirements such as top distance, light distance, wall distance, column distance and stacking distance to ensure the ventilation and fire safety of the warehouse.

4. Other precautions

Environmental requirements: Tires should be stored in a dry, ventilated, clean warehouse away from direct sunlight, with room temperature maintained at -10℃ to 30℃ and relative humidity of 50% to 80%.

Regular inspection: Whether it is short-term or long-term storage, the status of the tires should be checked regularly, including whether there is deformation, aging, cracks, etc.

Principles to follow: Tire storage should follow the "first in, first out" principle to ensure the service life and safety of the tires.

Qingdao Feiyue Storage Equipment Co., ltd. is a manufacturer of storage and logistics facilities that integrates research and development, production, and sales. For more information about rolling tire storage rack, please contact us.

Address：Jiaozhou Industrial Zone,Huangdao District,Qingdao,China

Email：admin@fyracks.com